Propellers control

Maintenance guide

ft:locale
en-US
Document type
Maintainer guide
Drone type
FoodShipper
HeavyShipper
LightShipper
Region
World

A propeller is a rotating component of a machine that provides thrust to push it forward. In a drone, the propellers are responsible for providing the lift and forward motion to the aircraft. Propellers are typically made from a lightweight material, such as carbon fiber, and are attached to a shaft that is connected to the motor.

Over time, propellers may become worn and need to be replaced. A propeller that is not properly balanced may cause the drone to vibrate and eventually damage other components. In addition, a propeller that is not properly aligned can cause the drone to drift or wobble in the air.

It is important to regularly inspect the propellers for damage and wear. If a propeller is damaged, it should be replaced immediately. If a propeller is worn, it may need to be replaced before it causes further damage to the drone.

The following steps should be followed to replace a propeller:

  1. Disconnect the battery from the drone using a spudger.

  2. Remove the propellers from the drone using a hex screwdriver.

  3. Remove the screws that hold the propeller in place.

  4. Replace the propeller with a new one.

  5. Reattach the screws that hold the propeller in place.

  6. Reconnect the battery to the drone.